BS EN 14035-25-2005
|
ID： |
BB4CB0B55D2E4D26B402A67CBDC7C6BF |
|
文件大小(MB)： |
0.37 |
|
页数： |
34 |
|
文件格式： |
|
|
日期： |
2013-6-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,14035-25:2005,Fireworks —,Part 25: Party poppers — Specification,and test methods,The European Standard EN 14035-25:2005 has the status of a,British Standard,ICS 71.100.30, , , ,BS EN 14035-25:2005,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 21 February 2006,. BSI 21 February 2006,ISBN 0 580 46858 5,National foreword,This British Standard is the official English language version of,EN 14035-25:2005. It partially supersedes BS 7114-2:1988 and,BS 7114-3:1988, which have been declared obsolescent.,NOTE BS 7114-2:1988 and BS 7114-3:1988 are cited in The Fireworks (Safety) Regulations 1997.,The UK participation in its preparation was entrusted to Technical Committee,CII/47, Fireworks, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Additional information,The United Kingdom, as a member of CEN, is obliged to publish EN 14035-25,as a British Standard. However, attention is drawn to the fact that the United,Kingdom voted against the approval of EN 14035-25.,The main reason for this disapproval is that BSI Committee CII/47 considers,that Figure 4 in 8.3 is inaccurate and misleading because various elements of,the figure are too small. The BSI Committee recommends that if a transparent,template is used to check type sizes on labelling, the template should be,accurately produced so that the height of each character and symbol on the,template is within +0.1,0 mm of the relevant minimum height specified in this,standard.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep UK,interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 30, an inside back cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 14035-25,November 2005,ICS 71.100.30,English Version,Fireworks - Part 25: Party Poppers - Specification and test,methods,Artifices de divertissement - Partie 25: Party-Poppers -,Spécifications et méthodes d'essai,Feuerwerksk鰎per - Teil 25: Party-Knaller - Anforderungen,und Prüfverfahren,This European Standard was approved by CEN on 12 September 2005.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2005 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 14035-25:2005: E,EN 14035-25:2005 (E),2,Contents Page,Foreword 4,1 Scope..6,2 Normative references .7,3 Terms and definitions7,4 Construction7,4.1 Shape..7,4.2 Materials of firework cas……
……